By insulating it from the outside, you can solve one of the most important problems, additional heat loss. If you put an additional insulating layer, it will serve as an obstacle between different temperature levels, outdoors and in the house. At the same time, the insulation will keep the house from excess moisture, as well as from the penetration of sunlight, which will allow the room to be operated for a much longer time.
There are various insulation options: the insulation is either glued to the wall or fixed with plaster, forming an air layer and securing it after waterproofing. Each of the methods has its own characteristics, and most of the work is entrusted to the master.
We prepare the surface of the walls
To prepare the wall for insulation, you need to take a very serious approach. It is necessary to remove the old layer, and try to make sure that the surface is smooth and clean.
Next, we ground the wall, align all the irregularities, holes, cracks, fill them and make them level with the entire surface. After the solution has completely dried, thermal insulation can be applied.
How to fix the material
If styrofoam is used as thermal insulation, then it should be fixed with corners. Thanks to the glue solution, we apply the insulation to the wall and press it well. The control is carried out using a level, which is an indispensable tool when working on home insulation. After the first layer has been applied, you can continue working and lay the next overlap. The sheets should be anchored, both in the corners and in the center of the material. Near the windows, as well as on the corners, the material can be fixed with metal corners, and the joints can be framed with masking tape. A reinforcing mesh is laid over the top as a reinforcement, and the surface is covered with plaster.
When mineral wool is used in place of insulation, a crate with a frame is placed on the wall in advance, taking into account that the frame should be smaller than the sheets of mineral wool. Staples must be attached to the wall, to which the material will later be attached.
If the insulation is made thanks to polyurethane foam, it is laid in a similar way as in cotton wool, or rather it is mounted on a frame. The solution itself is poured into the frame in order to obtain the greatest adhesion between the materials.
Naturally, due to the correct choice of material, it is possible to avoid large heat loss in the future, as well as save the finances spent on additional heating of the house. Δοκίμασε το Casinolab casino και απόλαυσε τη δράση.